Essential word:
Please ship e-mail to our customer support for the set up video, we now have made very professinal demo for this package.
Spes:
Lead Screw:
Materials: metallic
Size: 51.5cm/ 20.3in
Diameter: 0.7mm
Weight: 160g/ 5.7oz
Stepper Motor:
Variety of Part: 2
Rated Voltage: 3.6V DC
Rated Present: 1 Amp
Holding Torque: 0.48 Nm Typ. (Two section on/rated present)
Part Resistance: 3.6 ohm±10% (20℃)
Part Inductance: 8 mH ± 20% (1kHz 1V rms)
Rotor Inertia: 57 gcm^2
Motor Weight: 0.28kg
Insulation Class: B (130℃)
Step Angle: 1.8 ± 5% / Step
Included:
1x Mainboard
1x LCD Show
1x Lead Screw Bracket with Brass Nut
1x 34mm Stepper Motor
1x Lead Screw
1x Lead Screw Bearing Information
1x Z Coupler
1x Twin Z Stepper Cable
1x Z Motor Bracket with screws and t-nuts
3x Longer m6 screws
3x M6 nuts and spacers
1x Motor wires
3D Printer Full Improve DIY Package for Creality CR-10 into CR-10S Consists of 3D Printer Equipment Twin Z Axis, Mainboard, LCD, Lead Screws, Filament Detector, Motor Wires.
Full package for upgrading CR-10 into CR-10S. Features a CR-10S mainboard, a LCD show, a filament detector, a lead screw and different elements.
New CR-10S mainboard helps 2 new features: Printing resume after energy off and filament detection. Filament monitoring alarm safety will mechanically cease the printer when filament runs out to keep away from losing of filaments and time.
All wrapped up on this cr10s improve package! These are direct alternative elements from Creality. Twin Z-axis will make your 3D printer extra secure {and professional}.
CHPOWER is a TRUSTED VENDOR. Purchase with confidence.
