Specification:
Chip: L298N
Logic voltage: 5V
Logic present 0mA-36mA
Storage Temperature: -20 ℃ to ℃ to +135
Working mode: H-bridge driver (twin)
Drive voltage: 5V-35V
Drive present: 2A (MAX single bridge)
Most energy: 25W
Dimensions: 43x43x27mm
This module has a built-in 5v energy provide, when the driving voltage is 7v-35v, this provide is appropriate for energy provide
DO NOT enter voltage to +5v provide interface, nonetheless ledding out 5v for exterior use is obtainable.
When ENA allow IN1 IN2 management OUT1 OUT2
When ENB allow IN3 IN4 management OUT3 OUT4
Bundle Included:
2 x L298N Motor Drive Controller Board
1 x 11.8″ male-FeMale Dupont Cables 12 PIN
1 x 11.8″ Male-Male Dupont Cables 12 PIN
1 x 19.6″ 28AWG Wire
Make sure that this fitsby coming into your mannequin quantity.
The sign is proven within the determine
The connecting technique is proven inbelow determine after allow ENA ENB
Driving DC motor As a result of the module is drived by double H bridge,it will possibly drive two motors concurrently.
Enter the next driving timing from IN1-IN4 then the velocity and path of the stepper motor may be managed
Bundle Content material: 2 x L298N Motor Drive Controller Board, 1 x 11.8″ male-FeMale Dupont Cables 12 PIN, 1 x 11.8″ Male-Male Dupont Cables 12 PIN, 1 x 19.6″ 28AWG Wire
