Product Description
Twin Z Axis Package
About Us
Dawnblade is dedicated to offering novel, sensible and high-quality merchandise for each buyer.
Presently Primary merchandise is 3D printer equipment, most of that are matched with Creality printer.
Sooner or later, we’ll proceed offering extra 3D printer equipment for each buyer, so keep tuned.
Twin Z Axis Improve Package
Single Z-axis buildings often have the next points, equivalent to X-axis not horizontal, Z-axis vibration, filament piles simply.
By upgrading the printer to a dual-Z-axis construction, the above issues of are successfully solved, bettering print high quality.
This equipment matches for Creality Ender-3 sequence, Voxelab Aquila, and different 3D printer utilizing 365mm (or approximate) lead screw rod.
Significantly enhance the levelness
Simpler to do bed-leveling
Cut back Z-axis vibration
Keep away from the X-axis shaking
Enhance printing accuracy
Handy Assemble
Efficiency Components
Secure Efficiency
Low resistance 42-34 Stepper Motor, decrease noise, stronger torque.
No step misplaced throughout operation, which ensures operation Precision.
Precision Transmission
Exact and clean screw rod, repeated positioning accuracy as much as 0.01mm.
T8 screw rod mounted with sturdy metallic bracket, successfully rising X-axis load bearing capability.
Sturdy Leadscrew Mount
Apply for T8 diameter 8mm Z-axis lead screw rod.
Compact construction, delicate rotation.
Sturdy and put on resistant.
All-aluminium Inflexible Coupling
Offers torque transmision and alignment.
No simple step misplaced.
Energy Provide Holder
Easy set up, simple working.
Engineering plastic, gentle and powerful.
Twin Z-Axis Motor Wire
1 for two cable, simple set up.
No want to switch printer set, or change motherboard.
Z-axis Stepper Motor Mount
Product of aluminum alloy, gentle and sturdy and simple to assemble.
Utilized in Creality CR-10, Ender-3 and so on
Device Package
A instrument equipment is added to assist full the assemble total twin Z-axis equipment.
Set up
Detailed Steps
1. Flip off the printer, unplug the ability twine, and use a hex wrench to take away the 2 screws that are safe the ability provide. Take away the ability provide.
2. Set up the Coupler on the stepper motor and tighten the screws. Use the hexagon socket screws and the Z AxisMotor Bracket to repair the motor on the aluminum profile.
3. Take away all of the screws of sheet metallic pulley on the proper aspect of the X axis.
4. Use lengthy screws to repair the Z-axis sheet metallic and set up it on the X-axis proper sheet metallic. Screw the T8 screw into the screw nut to the coupler, and tighten the screw of coupler.
5. Set up twin Z stepper cable to the motherboard, and join two Z motors.
6. Set up the Phillips screw and the boat nut on the ability provide holder to put in the ability provide.
7. Place the lead screw bearing information on the left and proper sides of the X-axis aluminum profile and let the Z-axis rise to the best place. If one aspect is uneven,flip the corresponding coupler clockwise.
8. Set up the lead screw bearing information and tighten the screws. Take note of the alignment place of the mount.
Widespread Issues
Motion Not Easy
1. Test if the pulley can it’s rotated, there are 3 pulleys in whole.
2. Test if the screw is simply too tight, which will even have an effect on the motion.
3. Regulate the ccentric nut to alter the gap between pulley and 3D printer body.
Mattress Not Degree
When inserting lead screw bearing information, if one aspect is uneven, flip corresponding coupler clockwise.
Z-axis Run Not Easily
If Z axis doesn’t run easily throughout operation, attempt to loosen screws of corresponding Z axis.
Ideas
Earlier than assemble, flip off 3D printer, unplug energy twine, take away energy provide.
A few of its components are appropriate with Creality printers, you may DIY.
Its 42-34 stepper motor matches for X/Y/Z axis on Ender-3, Ender-3 Professional, CR-10, CR-10S.
Ender3-V2 doesn’t want the ability provide mount, please ignore it when putting in.
Set up of Stepper Cable
Join the top of wire with 1 port to the unique stepper cable connector.
Join the top of wire with 2 ports to those 2 motor.
Don’t join the cable to the principle board instantly.
Package deal Checklist
1 * 42-34 Stepper Motor
2 * Lead Screw Bearing Mount
1 * Energy Provide Holder
1 * Coupler
1 * Z Axis Lead Screw Bracket with Brass Nut
1 * Twin Z Stepper Cable
1 * Z Motor Bracket with Screws and T-nuts
1 * 365mm T8 Lead Screw
1 * All Screws and Instruments set
Easy Operating – Improve Single Z-axis construction to a twin Z-axis construction, avoiding backlog of filament totally, which improves stability of 3D printing.
Simple Leveling – Each ends of the X axis are raised and lowered synchronously, which reduces issue and frequency of mattress leveling clearly.
Elevated Accuracy – In contrast with unique construction, twin Z-axis equipment reduces the layer ripple attributable to Z-axis vibration, rising the printing efficiency of 3D printer.
Secure Efficiency – In contrast with Closed Timing Belt, this 3D printer components set nonetheless retains the design of stepper motor to make sure screw rod clean operation.
Simple Assemble – No want to switch or weld the machine, no want to switch motherboard, this 3D printer equipment equipment comes with directions, could possibly be assemble rapidly.
