Product Description:
The HC-05 bluetooth module could be set as a transmitter or receiver. It may possibly simply switch the information by means of the wi-fi, with out advanced PCB format or deep data within the Bluetooth software program stack. You possibly can mix this bluetooth module together with your system: MCU, ARM or DSP techniques, SOC techniques, Private Digital Assistants (PDAs), Pc Equipment or different techniques your wish to use beneath bluetooth features.
The HC-05 bluetooth module can construct a connection to different modules in two methods: as a grasp or as a slave. For instance, a robotic could be designed to be a grasp related to a slave bluetooth module or as a slave board to make a wi-fi reference to a PC.
Specification:
Built-in Bluetooth Serial Move-through Module Grasp-Slave 6 Pin JY-MCU anti-reverse
Excessive frequency: 2.4GHz
With VCC, GND, TXD, RXD, EN, STATE foot for the Bluetooth
Use the CSR mainstream bluetooth chip
Bluetooth V2.0 protocol requirements
Enter voltage: 3.6~6V; Prohibit greater than 7V
Absolutely suitable with Ard-uino
Excessive velocity: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps
Unimaginable small measurement (in regards to the measurement of a dime ), and RoHS Compliant TTL information clear
Switch between a bunch Bluetooth system
Works for Bluetooth TTL transceiver module which permits your goal system to each ship or obtain the TTL information.
Protection as much as 30ft. In-built antenna.
Working present: matching for 30 mA, matching the communication for 8 mA
Used for GPS navigation system, water and electrical energy gasoline meter studying system
With laptop and bluetooth, bluetooth adapter, PDA, seamless connection tools .
Package deal included:
2 x HC-05 bluetooth module.
Bluetooth module HC-05 Grasp and slave Two in a single module.
The manufacturing facility setting is slave mode, however you’ll be able to set this module to grasp mode so that you simply may be capable to connect with different Bluetooth 2.0 gadgets.HC-05 Wi-fi BT Module.
HC-05 Wi-fi BT Module: with this HC 05 Bluetooth module,You possibly can rapidly add the Bluetooth characteristic to your Ard-uino mission, after which you need to use your android telephone to manage some devices, resembling: swap, LED.
Grasp and Slave 2-IN-1 HC 05 Module:Working Voltage 3.6V to 6V , Default baud charge:9600,Default pin:1234.
Button: Press the button, the module enter the AT mode. AT instructions are executed solely in AT mode.
