Ender 3 / Professional / V2 Colour Contact Display screen with BL Contact and Creality 4.2.7 32 Bit Silent Board All-in-One Plug and Play Improve Equipment for Auto-Mattress Leveling and Improved UI on Inventory Ender 3 Sequence Printers

THE FIRMWARE FOR THIS SCREEN IS NOT OPEN SOURCE! YOU CANNOT CHANGE THE FIRMWARE FOR THIS PRODUCT EXCEPT TO EXCLUDE THE BLTOUCH! IF YOU DO NOT WISH TO USE THE BLTOUCH THEN PLEASE UPDATE THE FIRMWARE THAT IS LOCATED IN THE GOOGLE DRIVE FOLDER URL BELOW.
IF YOU HAVE A DUAL GEAR EXTRUDER/DIRECT DRIVE YOU WILL HAVE TO CHANGE YOUR E-STEPS/mm VIA PRONTERFACE. Please use this tutorial to regulate your E-steps/mm https://drive.google.com/drive/folders/1r0ALtM66y72NR1OIzT1Q5deXgUjaBdf1
RECOMMENDED E-STEPS/mm for twin gear extruders is 144.22.
PLEASE NOTE!!!-
THIS PRODUCT DOES NOT COME WITH A BLTOUCH MOUNT so you’ll have to 3D Print one – please obtain the STL file within the hyperlink for Ender 3 / Professional – https://www.thingiverse.com/factor:3003725 or this file for Ender 3 v2 https://www.thingiverse.com/factor:4462870.
After downloading, print after which proceed to put in the board, contact display screen, silent fan and the BL Contact.
PLEASE ONLY USE THE WIRING DIAGRAM IN THIS LISTINGS PHOTOS TO ATTACH THE BLTOUCH TO THE BOARD.
This management board comes flashed with Ender 3 / Professional / V2 firmware that helps the contact display screen and the Bltouch. Please notice that the mainboard, contact display screen and the Bl Contact should all be used for this product to work correctly.
For all Ender 3 / Professional / V2 customers, it is a PLUG AND PLAY drop-in set up equipment APART FROM altering your E-steps if in case you have a twin gear extruder or direct drive.
> Please use this tutorial for calibrating your z-offset when putting in your Bl Contact – https://www.youtube.com/watch?v=W8ouBPnRV4s
Flip your Ender 3 from 2018 right into a brand-new state-of-the-art machine with silent stepper motor drivers, shade show, and auto mattress leveling performance.
WARNING! This management board, Bl Contact and contact display screen, silent fan and 4.2.7 silent board combo DOES NOT use open supply and firmware and isn’t suitable with a filament runout sensor. PLEASE CONTACT F1RSTLAYER DIRECTLY FOR TECH SUPPORT!
THE FIRMWARE FOR THIS SCREEN IS NOT OPEN SOURCE! YOU CAN’T CHANGE THE FIRMWARE EXCEPT TO EXCLUDE THE BLTOUCH! IF YOU HAVE A DUAL GEAR EXTRUDER/DIRECT DRIVE YOU WILL HAVE TO CHANGE YOUR ESTEPS/mm VIA PRONTERFACE/OCTOPRINT. TUTORIAL LINK IN PRODCT DESCRIPTION. Creality have simply launched this beautiful 4.3” full shade LCD contact display screen. With the stroke of a finger, you possibly can navigate between menus with options like one contact heating/cooling and touch-controlled filament feeding and un-feeding.
BL TOUCH MOUNT NOT INCLUDED IN THIS KIT. The BL Contact is an extremely correct and dependable auto-mesh mattress leveling sensor that probes particular person spots for variations in Z peak on any print floor reminiscent of glass, aluminum, PEI, BuildTak with unimaginable accuracy to 0.005mm. That is nice for customers with small imperfections or warping of their print floor on account of handbook leveling. Contains 1.5m extension cable for neat cable administration options. BLTOUCH WIRING DIAGRAM IN PRODUCT PHOTOS!
That is the latest model of Creality’s 4.2.7 32 Bit silent management board with genuine TMC2225 Trinamic stepper drivers which enormously scale back the sound of the stepper motors throughout use. This new 4.2.7 management board has been proven to enhance print high quality for a lot of customers. This improve equipment comes with Plug and Play performance for any Ender 3 / Professional or V2. This complete {hardware} swap will take lower than 1 hour and rapidly turns your inventory Ender right into a contact operated printer in only one improve!
Amazon buyer help is NOT fitted to offering the Tech Assist wanted for this 3D Printing product. PLEASE CONTACT F1RSTLAYER DIRECTLY The upgraded silent fan included will be positioned on the hotend or the management board nonetheless for the reason that hotend fan is operating always, it’s prompt to be put in there. To keep away from needing to re-route all of the wires by way of the wire harness, you possibly can minimize the wires from the previous fan and splice them onto the brand new silent fan for a ache free swap!
This management board and contact display screen combo DO NOT use open supply firmware and should not suitable with ANY {hardware} or software program additions that require a firmware replace. This equipment is totally Plug-and-Play and can present your Ender 3 with full performance as is, whereas additionally permitting for the BL Contact improve sooner or later do you have to select to buy it. Unsupported {hardware} consists of, however just isn’t restricted to issues reminiscent of: filament run-out sensor, twin gear extruder, and direct drive extruder!